Have you been noticing that your Gigabyte RGB Fusion 2.0 isn’t working? This is a common issue, and we will go over some of the most common causes for this problem. The first thing to check is if your motherboard has the latest BIOS installed. If not, update it! Make sure all drivers are up-to-date on your motherboard and graphics card too. Lastly, make sure that there aren’t any loose connections between devices or cables in your system. We hope that these steps help fix the problem!
The Most Common RGB Fusion 2.0 Problems
- The RGB Fusion is a popular series of RGB LEDs that have been on the market for several years.
- The most common problems encountered with the RGB Fusion are related to the power supply and/or drivers being damaged, or wires becoming disconnected from their solder joints.
- As these lights draw significant amounts of current, they can cause damage if not used properly. Please be sure to use a high-quality power supply capable of supplying an ample amount of current (at least 25 amps) when using your LED system!
- It’s critical that all wires are securely soldered in place before powering up your system, as well as making sure you’ve installed appropriate cooling fans were necessary – especially at higher amperage systems!
- The power supply should be capable of supplying at least 25 amps for a single color, 50 amps for RGBW. You may need to install a second PSU if your system requires more current than that!
Fix Gigabyte RGB Fusion 2.0 Not Working
Though not inherently dangerous, many problems may arise from using RGB-incompatible components. The first step to addressing the problem is checking that all your components are compatible with the app if not then you will need to replace them all or contact customer service for a fix.
To fix this issue, you will need a 100% working version of Gigabyte RGB Fusion 2.0 which is downloadable on the internet or reinstall Windows 10.
To stay up to date on the latest version of RGB fusion 2.0, you’ll need to uninstall your old installation and reinstall it.
Installing the latest version of only rgb fusion 2.0 on a motherboard that does not support it will fix this issue.
The following fixes will also work for fixing RGB fusion not opening by clicking on the application shortcut.
Here are the steps for fixing Gigabyte RGB 2.0 fusion not working is given below:
- Whenever you install RGB Fusion on your PC, uninstall Aura Sync and iCUE.
- The quickest way to open your RGB Fusion shortcut is by right-clicking the keyboard and then clicking Open location.
- Delete the AtiTool folder from this directory of your PC(usually C:\Program Files (x86)\Gigabyte\RGB fusion).
- Place the GvBiosLib.dll file on the desktop then restart your PC.
- Run the RGB fusion app as an administrator and it will start normally.
If these steps do not work for you, then you’ll need to clear the CMOS of your computer and try these steps. There is a solution for every specific problem below, though if you don’t want to go through all this trouble, check our best RGB Fusion 2.0 alternatives!
This is a list of common issues related to RGB Fusion 2.0 and their solutions:
The following are some of the most common problems with RGB Fusion 2.0 and their fixes:
How to Fix RGB Fusion 2.0 Not Detecting GPU
This is often caused by a loose connection or disconnected cable from the motherboard. Make sure to check that any cables are connected and seated correctly in their ports, and try powering on your system again.
Here are the steps for fixing RGB Fusion 2.0 Not Detecting GPU is given below:
- To fix the problems you are experiencing, it is important to first uninstall Geforce Experience. Secondly, make sure all settings in Nvidia control panel on your PC are set to default values (Except the Ambient Occlusion setting).
- Type the exact model number for your graphics card and find out what you need.
- Open the text card on the official website and you will find that it is compatible.
- Configure your graphics card according to the website’s recommendations (only if there is a Linux installation guide).
- Use the software RGB fusion or RGB fusion 2.0 to control the settings of your GPU’s light.
How to Fix RGB Fusion 2.0 Not Detecting RAM
The RGB Fusion software does not detect RAM if it doesn’t support the app. Multiple people have asked me why their software isn’t picking up on G.Skill Trident Z modules, even though they are installed and working properly.I have learned from the official gigabyte website that popular G.skill Trident Z RGB memory modules are not compatible with the RGB fusion app, nor is their Trident Z royal series.
To function as advertised, these RAMs require an additional hardware component.
Now, the problem is:
The Trident Z Lighting Control app conflicts with the RGB fusion software and doesn’t function properly when installed on a PC.
So, here’s how to fix RGB Fusion 2.0 Not Detecting Trident Z RGB RAM:
- Explore the directory where you have installed RGB fusion.
- Delete the files Spddupm and SPD_Dump to prevent conflicts between RGB Fusion and Trident Z Lighting Control.
- Install the latest Trident Z RGB app in order to synchronize your RAM’s lighting.
How to Fix Gigabyte RGB Fusion Not Changing Colors
To fix the Gigabyte RGB Fusion not changing colors, you need to first make sure your motherboard supports Gigabyte RGB fusion.
If it does support this technology, then there are three possible reasons why the color isn’t displaying:
- You have a monitor plugged into an HDMI slot instead of DVI or VGA
- Your graphics card is set to output in 16-bit mode (HDMI) as opposed to 32bit mode (DVI). To fix this issue go into the NVIDIA control panel and change “Preferred Mode” from “Auto-Select” to “32 Bit”.
- To resume normal operation with all lights on full power again, click ‘Apply’ at the bottom right corner of the screen.
- The cable between your computer and display might not be set up to handle the transfer of high-speed data.
- To fix this problem, you need to check that your display is capable of accepting a digital input and use an HDMI cable instead if needed.
If none of these solutions solve the Gigabyte RGB Fusion not changing colors issue on your PC then you can try this solution.
- Restart your computer, hold down the “Delete” key to enter the BIOS/boot options menu.
- Press F2 or Del to enter BIOS.
- Access the Peripherals tab, open RGB fusion.
- To fix the issue, disable RGB fusion, then save your settings and exit.
- To enable the RGB fusion from BIOS, go through the same steps outlined above. Save your settings and exit
- Now open RGB Fusion in your computer as an administrator, and you will see that the colors are changing for different effects.
How to clear CMOS
If you have installed a new motherboard, you will need to clear the CMOS. This is done by removing all of the power from your computer and then holding down the “clear CMOS” button on your motherboard for about ten seconds with no power going to it. If this does not work, try jumping pins 49-50 or 51-52 on your motherboard with a paperclip/wire until there are volatile sparks in order to discharge any static electricity that may be built up in components around those pins. Once everything has been discharged, plug back into AC power and wait 15 minutes before turning it back on.
- Step one is to turn off your computer.
- Step two is to unplug your power source, commonly known as an outlet or receptacle.
- Turn off the power supply before proceeding.
- If there is a side panel that needs to be removed, you need to remove it.
- Check the battery compartment on the motherboard.
- Unclip the CMOS battery by pulling on the clip at its side.
- To clear the CMOS, keep the battery out for 10 minutes
- And I place it in its place again.
- Boot up the computer and your CMOS will be cleared.
Fix RGB fusion interfering with RAM overclocking
This is a different issue but it occurs for most people.
To check your RAM speed, visit the Task Manager’s Performance tab.
If you are seeing 2133MHz on all four memory modules, then your color fusion application is the problem.
Here’s how to fix this issue:
- Go to the Peripherals tab and open RGB fusion.
- Turning on RGB fusion can cause problems with CMOS.
- When inside your motherboard’s BIOS, go to the Power tab.
- Enable Energy-Related Products (ErP) to prevent the RGB lights from emitting any light when the PC is off.
- Save the settings and exit.
- To clear the CMOS, unplug your PC from the power source and then plug it back in.
This concludes my article on Gigabyte RGB Fusion. I hope you’ve learned something from it! If not, then please let me know and I’ll try to help as much as possible. Thanks for reading!